Home About Product Contact Terms

Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406

For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.

Description: A two part polyester/aliphatic polyurethane coating for use as both a camouflage and non-camouflage finish coat on military combat equipment.

Conformance: Conforms to military specification MIL-C-46168, Type-II

Technical Data

Type Polyester/Urethane
Color Fed-std-595 Camouflage/Lusterless Finish
Solids by Weight: 65%
Solids by Volume: 55%
Volatile Organic Compound (VOC) 3.5 lbs. / gal. or 420 Grms./Ltr.
Recommended Film Thickness: 1.5 - 2.0 mils
Mixing Ratio 4:1 by volume
Theoretical Spreading Ratio: 250 sq. ft. /gal @ 2.0 Mil DFT
Flash Point 30 F (mixed)
Pot Life @ 77 F (25 C) 2 hrs.
Drying Time Hours @ 77F (25 C):
To touch: 30 minutes
Dry hard: 3 hours
Dry through: 4 hrs.
Recommended Primers MIL-P-23377 & MIL-P-53022
Recommended Thinner MIL-C-46168 Polyurethane Thinner

Application Data:
Apply by conventional or airless spray, brush, roller. DeVilbiss MBC-510 gun with E tip and needle and 765 air cap.
Details for Airless Spray: Output fluid pressure: 120 bar (atm) 1740 PSI. Min. nozzle orifice: 0.013"

Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.