8(a) Certified
                SDB Certified

                Manufacturer of Industrial,
Marine, & Speciality Coatings

Home About Product Contact Terms

Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406

For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.

Description: A two part, VOC compliant, polyester/aliphatic polyurethane coating that is intended for use on aircraft weapons systems and other applications.

Conformance: Conforms to federal specification MIL-PRF-85285D, Type-II

Technical Data

Color and Finish: Fed-std-595, Colors in gloss, semi- gloss and camouflage finish
Generic Type: Polyester/Urethane
Mixing Ratio: 2:1 by Volume
Percent Solids by Weight: 70 1
Percent Solids by Volume 58 1
Volatile Organic Compounds (VOC): 2.8 lbs. / gal. or 340 Grms./Ltr.
Theoretical Spreading Rate: 250 sq. ft. /gal. @ 2.0 Mil DFT
Flash Point: 30 F
Recommended DFT: 1.5-2.0 mils/coat
Drying Time @ 75 F:
To touch: 6 hrs max
To dry hard: 12 hrs max
Pot Life @ 25C/77F: 5 hours min.
Recommended Primers: MIL-PRF-23377 or MIL-P-24441
Recommended Thinner: MIL-T-81772, Type-I Thinner for Aircraft Coating

This product is supplied in 3 Gallon kits, which consists of 2 Gallons of the Paint (Short Filled in 3 Gallon containers) and 1 Gallon of the Hardener (Curing Agent) packaged separately. Mix both the components using a hand held paddle to a homogenous product.

The coating can be applied by conventional, airless, HVLP or electrostatic spray application. When spray is applied at 15.6 to 32.2 C (60-90 F) and a relative humidity of 20-80 percent, the coating material shall yield a smooth uniform film of dry film thickness of about 2.0 mils.

Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.