Home About Product Contact Terms



Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406




For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.
Marine & Offshore Paints


A.) Primers
B.) Finish & Intermediate Coats
C.) Antifouling/Bottom Paints




A.) Primers

(1.)Simprime-112
A multipurpose, rust inhibitive, red oxide, high quality marine primer to be used for steel exposed to a normal or mildly corrosive environment.
Product Data Sheet          Product Data Sheet (PDF Format)


(2.) Simprime-98
An excellent, high performance, alkyd based, lead and chromate free marine primer suitable for use on superstructures and steel surfaces not normally exposed to water immersion.
Avalable in: Yellow & Gray/Green colors.
Product Data Sheet          Product Data Sheet (PDF Format)


(3.) Simco-IZ-1001 Inorganic Zinc Coating
A two-component, fast dry, solvent based, self-curing inorganic zinc primer.
Available in: Green & Red.
Product Data Sheet          Product Data Sheet (PDF Format)


(4.) 1502-Zinc Rich Epoxy Primer
A two-component epoxy polyamide primer with high level (approx. 90%) of zinc dust by weight in the dry film.
Available in: Green & Red.
Product Data Sheet          Product Data Sheet (PDF Format)


(5.) Polyguard-3002/3003 Epoxy Primer
A high performance, two-component, epoxy polyamide rust-inhibitive primer designed to protect steel and aluminum in a highly corrosive and chemically aggressive environment
Available in: Green, Gray, & Red/Brown.
Product Data Sheet          Product Data Sheet (PDF Format)


(6.) Simchlor-6004/6005 Chlo. Rubber Universal Primer
Ideal for use in ships, offshore rigs, tanks, pipelines, and other metal surfaces which require high resistance to rust and chemicals.
Available in: Red & Gray.
Product Data Sheet          Product Data Sheet (PDF Format)


(7.) Simflex-427 Aluminum Boat Paint
A single part vinyl resin and zinc chromate based coating which exhibits excellent adhesion to aluminum and galvanized substrates. Used as a primer/finish coat directly applied over raw aluminum saving considerable cost.
Product Data Sheet          Product Data Sheet (PDF Format)


(8.) Simflex-117 Vinyl Pretreatment Wash Primer
A two-component, quick-dry etch primer designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. Confirms to MIL-P-15328, Navy formula #117.
Product Data Sheet          Product Data Sheet (PDF Format)



B.) Finish & Intermediate Coats

(1.) Simlux-800
Ext./Int. finish with good color and gloss retention. Designed for application over alkyd primers. Suitable for boottopping, deck, machinery of equipment, superstructure, and marine surfaces above the waterline.
Available in a full range of colors.
Product Data Sheet          Product Data Sheet (PDF Format)


(2.) Silkyd Enamel-7001 (Conformance TT-E-490 Semi-gloss Alkyd Finish)
A single component, high performance, air-drying, 30% silicone modified alkyd enamel, semigloss, int./ext. finish intended for use on any properly prepared primed metal. The resultant finish is highly weather resistant and exhibits excellent gloss and color retention compared to conventional alkyd coatings. It is recommended for all marine surfaces above waterline storage tanks. It can be used for upgrading conventional systems.
Available in a full range of colors.
Product Data Sheet          Product Data Sheet (PDF Format)


(3.) Silkyd-7010
A high gloss, silicone-alkyd finish to be used as a maintenance topcoat which has a lasting aesthetic and protective finish
Available in a full range of colors.
Product Data Sheet          Product Data Sheet (PDF Format)


(4.) Simguard-300 High Build Epoxy Finish
A self priming, polyamide cured, epoxy coating suitable for ships, barges, & offshore structures exposed to fresh and salt water. It can also be used inside of potable water tanks
Product Data Sheet          Product Data Sheet (PDF Format)


(5.) Tankguard-380 H.S. High Build Epoxy Tank Coating
Developed for use as a non-toxic, amine cured, high solids, chemical resistant, epoxy tank lining. Recommended as a general protective lining for cargo carrying & ballast tanks.
Product Data Sheet          Product Data Sheet (PDF Format)


(6.) Simguard-2120
It is a two-part, high solids, low VOC, high build, refined bleached tar epoxy coating. It can be used as tank coating in water and cargo/ballast tanks subject to water and/or petroleum immersion.
Product Data Sheet          Product Data Sheet (PDF Format)


(7.) Solokote-3160
A uni-coat, high build, epoxy primer finish. This product provides excellent water and crude oil resistance and can be applied over a tight rust surface in non-immersion conditions
Product Data Sheet          Product Data Sheet (PDF Format)


(8.) Simtar-209 Coal Tar Epoxy
A specially formulated anti corrosive coal tar epoxy designed to protect metal and concrete from deterioration and mechanical damage in a wide range of environmental conditions.
Product Data Sheet          Product Data Sheet (PDF Format)


(9.) Simtar-200 Coal Tar Epoxy
A self priming, two-component, high build, coal tar epoxy with excellent adhesion and abrasion resistance. Recommended for salt water immersion. It provides 16.0-20.0 mils with two coats and conforms to U.S. Corps of Engineers formula C-200 and SSPC spec NO. 16.
Product Data Sheet          Product Data Sheet (PDF Format)


(10.) Simlite-465 Undercoat/Primer
Simlite-465 is a flat alkyd primer/enamel.
Available in: White & Black
Product Data Sheet          Product Data Sheet (PDF Format)


(11.) Simchlor-600
A high performance, chlorinated rubber base coating specifically formulated to withstand continuous water immersion and the effects of wear & weather. Recommended for use on concrete or steel swimming pools, decks, and walking surfaces.
Product Data Sheet          Product Data Sheet (PDF Format)


(12.) Simchlor-650
A single part, chlorinated rubber based gloss finish which provides a tough, hard, and durable film for protection against alkalis, mineral acids, salts, and fresh water. It is fast drying with excellent intercoat adhesion.
Product Data Sheet          Product Data Sheet (PDF Format)


(13.) Safeguard-660
A non-skid coating suitable for all weather deck areas of ships, barges, drilling platforms, catwalks, stairs, and anywhere it is important to minimize shipping hazards.
Product Data Sheet          Product Data Sheet (PDF Format)


(14.) Solo-Kote-2500
A single coat, high build, quick dry unmodified chlorinated rubber coating with anti-corrosive pigments designed for use directly over steel surfaces. Resistant to wear and impact, sea water splash and salt air exposure. It is recommended as a finishing one coat in cargo holds and shipping containers.
Product Data Sheet          Product Data Sheet (PDF Format)


(15.) Simthane-902 High Performance Polyurethane Finish
A two part high solids Acrylic & Aliphatic polyurethane finish which cures to a very hard, high gloss flexible coating with outstanding color retention. This coating has exceptional resistance to weathering and severe environmental conditions. It is used for exterior or interior applications wherever a superior gloss and color retention finish is desired, such as storage tanks, structural steel, pipelines, production equipment and offshore platforms, etc. Used as a permanent finish coat for the most severe marine or industrial exposure.
Product Data Sheet          Product Data Sheet (PDF Format)


(16.) Simthane-902-HS3 High Solid Polyurethane Finish
A two-component high solids aliphatic acrylic polyurethane coating which cures to a very hard, high gloss flexible coating with outstanding color retention. It builds a high film thickness in one coat and has excellent hiding power. It meets the VOC requirement for stationary sites. This coating has exceptional resistance to weathering and severe environment. Used for exterior or interior applications wherever a superior gloss and color retention finish is desired, such as storage tanks, structural steel, pipelines, production equipment and offshore platforms etc.
Product Data Sheet          Product Data Sheet (PDF Format)


(17.) Silkyd-7210 High Performance Silicone Modifed Alkyd Paint
A high grade, air-dry, VOC compliant, copolymerised silicone alkyd enamel. The ultimate non-chalking finish coat. Tough, resilient coating designed for exceptional exterior durability with superior gloss and color retention. It is an ideal maintenance topcoat with good flexibility and intercoat adhesion.
Product Data Sheet          Product Data Sheet (PDF Format)


C.) Antifouling/Bottom Paints

1.) Seaguard 50-1 Conventional Anti-Fouling Paint

General Description:
Sea-Guard 50-1 is a high performance Anti-foulant designed for intermediate term (12-16 months) protection from fouling on hulls, piers and other submerged equipment. The toxin content is high with a controlled release so that ship bottoms receive extended protection between dry-docking. 50-1 contains no tin compounds.

Recommended Uses:
Recommended on barges, ships, and boats traveling in temperate and tropical waters.
Product Data Sheet          Product Data Sheet (PDF Format)


2.) Seaguard 50-2 Chlorinated Rubber Anti-Fouling Paint

General Description:
Sea-guard 50-2 is formulated with chlorinated rubber and has a fast set and recoat time. It is designed to provide extended protection for up to 24 months to underwater hull and other submerged equipment.

Recommended Uses:
Recommended for use on barges, ships, boats and drilling vessels. Suitable for steel, wood and fiber glass substrates.
Product Data Sheet          Product Data Sheet (PDF Format)


3.) Seaguard 50-3 Vinyl Anti-Fouling Paint

General Description:
A physical-drying long life antifouling based on Vinyl Resin and a high content of cuprous oxide biocide that prevents marine growth on ships trading between cold water to subtropical ports.

Principal Characteristics:
Prevents settlement of bacterial, shell and weed fouling for prolonged periods. Protects for approximately 18 - 24 months when two coats (3.0 mils each) are applied. Recommend for use on barges, ships and drilling vessels. Suitable for steel, wood and fiberglass substrates.
Product Data Sheet          Product Data Sheet (PDF Format)


Copyright 2001-2012 Simco Coatings Inc. All rights reserved.