One component corrosion inhibitive high quality Primer for steel exposed to a normal or mildly corrosive environment. Use over alkyds to upgrade system.
MULTIPURPOSE RED OXIDE MARINE PRIMER
It is excellent for priming storage tanks, industrial plants, machinery, and other metal subjected to heavy industrial use and to exterior exposure.
||Mod. alkyd with rust inhibitive pigment
||One year (subject to re-inspection)
||43.0% ± 1.0%
|Weight per Gallon:
||12.5 ± 0.2
||1.5 - 2.0 mils
|Dry Temp. Resistance:
||Approx. 700 sq. ft. / gal. @ 1 mil. DFT.
|Drying Time @ 75º F:
|To Full Cure:
||Simco T-1 thinner for enamel
All surfaces must be clean, dry, and free from all loose rust, scale, paint or oil. For best results abrasive blast SSPC-SP6 commercial.
Brush, roller, spray.
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.