Home About Product Contact Terms



Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406




For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.
SIMTAR-209 COAL TAR EPOXY

Description: A specially formulated anti corrosive coal tar epoxy designed to protect metal and concrete from deterioration and mechanical damage in a wide range of environmental conditions. Suitable for use in a variety of immersion applications.

Recommended Uses: Immersion and tank lining service, ship hulls, marine docks, offshore piling, oil refining, and sewerage treatment plants.

Technical Data

Generic Type: Coal tar epoxy
Color: Black, brown
Flash Point: 80 F (ready mixed)
Shelf Life: One year (subject to re-inspection)
Finish: Semi-gloss
Mixing Ratio: 5:1 base to hardener by volume
Pot Life @ 77 F 3-4 hrs.
Volume Solids: 74.0 2% depending on color
Weight per Gallon: 11.6 0.2
Recommended DFT: 8-12 mils
Theoretical Coverage: 1100 sq. ft. / gal. @ 1 mil
Drying Time @ 75 F:
To Touch: 4 hours
To Topcoat: 24 hours
To Full Cure: 7 days
Recommended Thinner: Simco thinner R-200

Surface Preparation:
All surfaces must be clean, dry and free from all loose rust scale, paint or oil. For best results, abrasive blast SSPC-SP6 commercial or SSPC-70 near white.

Application Data:
Apply by airless spray, brush or roller.

Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.