CORROSION INHIBITING SECOND COAT PRIMER
One component corrosion inhibiting alkyd primer based on calcium borosilicate and synthetic iron oxide
As an intermediate coat in a three coat paint system on structural steel substrates exposed to moderate corrosive environments.
Conforms to Louisiana Department of Transportation & Development. Specifications MS-285-003 (9/87) System 'B'
||10.80 lbs. minimum
||4.0 Mils Wet Film Thickness
|Viscosity (Ku) @ 77ºF:
|Solids by Volume:
||52 ± 1%
|Volatile Organic Compound (VOC):
||3.0 lbs./gal. or 370 grm./ltr.
||Approx. 400 sq. ft. / gal.@ 2.0/mils DFT.
|Dry Through After:
All surfaces must be clean, dry and free from all loose, rust, scale, paint or oil. For best result abrasive blast SSPC-SP6.
Brush, roller, or spray
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights and electrical equipment.
(D) Non-sparking shoes and tools for workers in the area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in the work area.
(F) Avoid breathing of vapor, contact with skin and eyes.
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.