Home About Product Contact Terms

Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406

For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.

Description: Pourable Epoxy Repair Kit based on a two component solvent free epoxy formulated for application by pouring for on site rehabilitation of pitted steel bottoms in storage tanks and in cargo and ballast tanks of ships.

Technical Data

Color and Finish: White, gray and buff; semi-gloss
Mixing Ratio: 2:1 (A:B)
Density (Spec Gravity): 1.36 kg/dm3, 11.3 lbs. / gal.
Solids by Volume: 100%
Temperature Resistance: 150-175C/300-350 F - Dry heat
Pot Life: 1 hr. @ 38 C/ 100 F
Volatile Organic Compounds: 0.07 lbs/gallon
Flash Point: Component A 255 C / 490 F
Component B 91 C / 196 F
Theoretical Spreading Rate:
12.8 sq. ft. / gal. @ 1/8 inch
Drying Time @ 75 F:
To touch: 6 hours
To recoat: 24 hours
To cure: 72 hours

Surface Preparation:
Abrasive blast cleans to SSPC-SP10 specifications, Swedish Standard SA 2 1/2.

Mixing and Application:
Pit-Guard 3900 is supplied in two components "A" and "B". Mix two parts of component "A" and one part of component "B" together by hand or power mixer to insure complete intermixing of base and catalyst. Apply by pouring immediately after mixing.

Harmful if swallowed. Do not store near open flame. Avoid contact with skin and eyes.

First Aid:
In case of contact with eyes immediately flush with plenty of water for 15 minutes and get medical attention. For skin; wash with soap and water. If swallowed, induce vomiting. Call physician.

The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.