Home About Product Contact Terms

Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406

For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.

Description: Milvar-831 is a clear, air drying varnish of the alkyd resin type and is intended for interior use, primarily as a transparent protective finish for wood. It serves as an undercoat for enamels when used on wooden construction and is also suitable for use as an aluminum vehicle. However, aluminum paint using this varnish as a vehicle should be used hours after is it made.

Conformance: Complies with Federal Specification No.: TT-V-109C

Technical Data

Color & Finish: Light Pale, Gloss Finish
Weight/Gallon: 7.50
Solids by Weight: 44% (min)
Solids by Volume: 36% (min)
Viscosity Sec Ford Cup #4: 35-45
Flash Point: 38C (100F)
Volatile Organic Compound VOC: 4.1 Lbs/Gallon (492 Grams/Liter)
Thinner: Mineral Spirits
Drying Time @ 75 F:
To touch: 3 hours
To dryhard: 18 hours

The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.