Home About Product Contact Terms



Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406




For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.
PRIMEGUARD-11414
FAST DRY CORROSION INHIBITING PRIMER


Description:
A single component, VOC compliant lead and chromate free quick dry primer suitable to be used on properly solvent cleaned or pretreated metal surfaces where exposure to lead or chromate pigments is not permitted. It is not intended for use on the inside of potable water tanks or for marine use.

Conformance:
Complies with military specification MIL-P-11414E

Technical Data

Generic Type: Alkyd Resins Solution
Color and Finish: Red Oxide, Low Sheen
Solids by Weight: 75%
Solids by Volume: 50%
VOC: 3.50 lbs./gallon (420 grams/liter)
Flash Point: 45F
Shelf Life: One year (subject to re-inspection)
Recommended DFT: 1.5 - 2.0 mils
Theoretical Coverage: Approx. 300 sq./ft. @ 1.0 mils thickness
Drying Time @ 75 F:
To touch: 5 min.
To dryhard: 15 min.
Recommended Thinner: MIL-T-81772B, Type-III

Surface Preparation:
All surfaces must be clean, dry and free from all loose rust, scale, paint or oil. For best result, abrasive blast SSPC-SP6

Application Data:
Apply by Brush or Spray

Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.