Home About Product Contact Terms



Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406




For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.
TT-E-489
ALKYD ENAMEL GLOSS PAINT


Description:
Specification TT-E-489 covers an alkyd gloss enamel suitable for use on primed exterior & interior wood and metal surfaces.

Technical Data

Color and Finish: As per Fed STD 595; Gloss Finish
Solids by Weight: 65%-70% (varying by color)
Solids by Volume: 48%-52% (varying by color)
VOC: 3.50 Lbs./Gallon (420 Grms./Liter)
Flash Point: 41C (105 F)
Shelf Life: One year (subject to re-inspection)
Recommended DFT: 1.5-2.5 Mils/Coat
Theoretical Coverage: Approx. 400 Sq. Ft./Gallon @ 2.0 mils
Drying Time @ 75 F:
To touch: 2 hours
To dryhard: 8 hours
To dry through: 48 hours
Recommended Primer (for metals): TT-P-664
Recommended Thinner: Mineral Spirits (A-A-2994)

Surface Preparation:
This product is designed to be applied over blasted or primed steel. Ensure that the surface is free from contaminants.

Application Data:
Can be applied by conventional spray, brush or a roller. Mix the product thoroughly before use. Thin up to 5% with mineral spirits if required for work ability.

Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.