Home About Product Contact Terms



Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406




For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.
TT-E-515
QUICK DRYING ALKYD ENAMEL LUSTRELESS


Description: It is a single pack quick drying alkyd based lustreless enamel suitable to be used as a finishing coat on machinery and equipment.

Conformance: In compliance with Fed Spec TT-E-515

Technical Data

Generic Type: Short oil alkyd resin
Color and Finish: As per Fed-STD-595 Colors, Flat Finish
Flash Point: 80 F
Percent Volume Solids: 44-46% (Varies by color)
Solids by Weight: 65-70% (Varies by color)
Volatile Organic Compounds (VOC): 3.6 Lbs./Gallon (430 Grams/Liter)
Recommended DFT: 2.0-2.5 Mils/Coat
Specular Gloss, 60: 5-6
Recommended Thinner: MIL-T-81772 Type III
Shelf Life: 1 year
Drying Time @ 77 F:
To touch: 5 min.
To dryhard: 10 min.
To tackfree: 15 min.
To full hardness: 72 hrs.


Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.