Home About Product Contact Terms

Simco Coatings Inc.
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Toll-Free: 866.95.SIMCO
Fax: 504.433.1406

For more information or purchase request

Email: sales@simcocoatings.com

Legal/Privacy Info.

The enamel covered by this specification is one grade of quick drying synthetic lusterless enamel intended for use as a finish coat on phosphated or primed metal substrates and on ammunition components. It is not intended for use where gasoline resistance is a prime requisite such as automotive equipment.

Technical Data

Generic Type: Styrenated alkyd type resin
Color and Finish: Fed-STD-595 Colors, Lusterless
Solids by Weight: 68%-70%
Solids by Volume: 44%-46%
VOC: 3.60 lbs./gallon (430 grams/liter)
Flash Point: 45F
Shelf Life: One year (subject to re-inspection)
Specular Gloss: Approx. 5
Viscosity (Ku): 70-75 Ku
Recommended DFT: 1.5 - 2.0 mils
Theoretical Coverage: Approx. 300 sq./ft. @ 1.0 mils thickness
Drying Time @ 75 F:
To touch: 5 min.
To dryhard: 10 min.
To tack free: 15 min.
To dry through: 20 min.
To full hardness: 72 hours.
Recommended Thinner: MIL-T-81772B, Type-III

Surface Preparation:
All surfaces must be clean, dry and free from all loose rust, scale, paint or oil. For best result, abrasive blast SSPC-SP6

Application Data:
Apply by Brush or Spray

Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.

The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.

Copyright 2001-2012 Simco Coatings Inc. All rights reserved.