One component, VOC compliant alkyd based primer intended primarily for use as corrosion-inhibiting primer on aluminum and aluminum alloy structures and surfaces and on substrates coated with a pretreatment coating conforming to MIL-C-8514 or DOD-P-15328.
FAST DRY RUST INHIBITIVE ALKYD PRIMER
Federal specification TT-P-1757B, Type ( I or II), Class (C or N), and color (Y or T) as applicable.
||Mixture of Phenolic & Alkyd Resins
|Color and Finish:
||Yellow or Green, Low Sheen
|Percent Volume Solids:
|Solids by Weight:
|Volatile Organic Compounds (VOC):
||2.8 lbs./gal. or 340 grms./ltrs.
|Theoretical Coverage @ 1 Mil:
||Approx. 800 Sq. Ft./Gallon
|Drying Time @ 75º F:
Apply by spraying, brushing or dipping over surface treated metal or pretreatment coating. If used for dip or flow-coat application, the suitability should be determined by the user.
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.